In case it’s getting tough!
The Sharkoon BD28 is a PC case in ATX format, geared for the needs of gamers and enthusiasts. The case is available in red, blue and green, with the internal lacquer, fan color as well as the front LED also in the matching color. Next is a gunmetal edition with 2x blue LED fans and a black interior finish. The acrylic side panel provides, in all color variations, insight into the inner life of the built-in components.
Generous Space
With a width of 235 mm and generously broad side panels, easy installation of large tower coolers with a height of up to 179 mm is guaranteed. Likewise, the BD28 offers more options for the installation and unobtrusive wiring of all components. Extra-long graphics cards up to 41.5 cm can be installed due to the modular hard drive management. If equipped with the maximum 2.5” hard drives/SSDs, the BD28 still offers enough space for VGA boards up to 32.5 cm.
Fan Configuration
With the pre-installed Low Noise 120 mm LED fans in the front as well on the back, it’s already arranged for optimal cooling. To further enhance the air flow inside the case, up to three additional fans can be installed. On the top of the case there is space for either two 120 mm, two 140 mm or a 180 mm fan. In the front, there are already prepared holes to mount an additional 120 mm fan. To correspond with the internal color design elements the lights are matched to compliment the color version. With the red version a red LED fan illuminates in the case’s front and backside, this is also true with the blue and green versions with their respective colors.
Front Connection
Two USB 3.0, two audio as well as two USB 2.0 ports in the front offer quick access for connecting peripherals devices. In the event that the mainboard does not have an internal USB 3.0 connector, the two USB 3.0 ports can also optionally connect and operate in USB 2.0 mode.
Installation Options for Drives
The case offers two 5.25“ drive bays for screwless installation of optical drives. For the installation of card readers or other devices in 3.5” format a 5.25” adapter is included. Up to three 3.5” HDDs and four 2.5” HDD/SDD can be mounted without screws due to the included rack mounting system. An additional 2.5” HDD/SSD can be mounted on the bottom of the case, if needed.
Features:
-
ATX case
-
2x 5.25" drive bays (external), 1 mounting adapter for 2.5" and 3.5" HDD/SSD included
-
4x 2.5" HDD/SSD bays (rail type) with removable design
-
3x 3.5" HDD bays (rail type)
-
1x 2.5" HDD/SSD bay (screw type)
-
Front I/O: 2x USB3.0 (internal 19-pin mainboard connector), 2x USB2.0, 2x audio
-
Quick fasteners
-
2 openings for water cooling
-
Acrylic side panel
-
Cable management system
-
Supports VGA cards up to 32.5 cm in length (up to 41.5 cm, if middle HDD cage is removed)
-
Dimensions: 480 x 235 x 460 mm (L x W x H)
-
Weight: ~6.5 kg
Fan configuration:
|
Front panel |
|
1x 120 mm LED fan (pre-installed) + 1x 120 mm fan (optional) |
|
Rear panel |
|
1x 120 mm LED fan (pre-installed) |
|
Top panel |
|
2x 120 mm or 2x 140 mm or 1x 180 mm fan(s) (optional) |
Compatibility:
|
Max. length graphics cards |
|
32.5/41.5 cm (if middle HDD cage is removed) |
|
Max. height CPU cooler |
|
17.9 cm |
|
Max. length PSU |
|
30 cm |
Color versions:
|
Black case with blue color setup (fan LED, power LED, M/B plate painting) |
|
Black case with red color setup (fan LED, power LED, M/B plate painting) |
|
Black case with green color setup (fan LED, power LED, M/B plate painting) |
|
Gunmetal gray case with blue color setup (fan LED, power LED) |
